90G55:耐候性PA66:55%玻纤PA66日本旭化成
90G55:耐候性PA66:55%玻纤PA66日本旭化成
特性备注:增强的强度和刚性,玻璃纤维含量为55%。良好的外观和耐气候性。
重要参数: 密度:1.64 g/cm3 成型收缩率:0.35 % 缺口冲击强度:110 拉伸强度:221 MPa 断裂伸长率:2%硬度:120 热变形温度:225 ℃
生产厂商:日本旭化成工业株式会社
Component - Plastics [guide info]
E48285
90G55 | 增强的强度和刚性,玻璃纤维含量为55%。良好的外观和耐气候性。 | 汽车外部零件 |
---|---|---|
90G60 | 表面平滑,同时还具有90G55的刚性。 | 汽车外部零件 |
ASAHI KASEI CHEMICALS CORP
KAWASAKI WORKS, 1-3-1 YAKOH, KAWASAKI-KU, KAWASAKI-SHI KANAWAGA210-0863 JP
90G55
Polyamide 66 (PA66), "Leona", furnished as pellets
Min Thk Flame RTI RTI RTI
Color (mm) Class HWI HAI Elec Imp Str
BK 1.5 HB - - - - -
3.0 HB - - - - -
Comparative Tracking Index (CTI): - Inclined Plane Tracking (IPT):-
Dielectric Strength (kV/mm): - Volume Resistivity (10xohm-cm):-
High-Voltage Arc Tracking Rate (HVTR): - High Volt, Low Current ArcResis (D495): -
Dimensional Stability (%): -
ANSI/UL 94 small-scale test data does not pertain to buildingmaterials, furnishings and related contents. ANSI/UL 94 small-scaletest data is intended solely for determining the flammability ofplastic materials used in the components and parts of end-productdevices and appliances, where the acceptability of the combinationis determined by UL.
Report Date: 2013-03-13
Last Revised: 2013-03-27 © 2015 UL LLC
门镜撑架 | 90G55/90G60 | |
车顶支架 | 90G55/90G60 |
IEC and ISO Test Methods
Test Name Test Method Units Thk (mm) Value
Flammability IEC 60695-11-10 Class (color) 1.5 HB75 (BK)
3.0 HB40 (BK)
Glow-Wire Flammability (GWFI) IEC 60695-2-12 C - -
Glow-Wire Ignition (GWIT) IEC 60695-2-13 C - -
IEC Comparative Tracking Index IEC 60112 Volts (Max) - -
IEC Ball Pressure IEC 60695-10-2 C - -
ISO Heat Deflection (1.80 MPa) ISO 75-2 C - -
ISO Tensile Strength ISO 527-2 MPa - -
ISO Flexural Strength ISO 178 MPa - -
ISO Tensile Impact ISO 8256 kJ/m2 - -
ISO Izod Impact ISO 180 kJ/m2 - -
ISO Charpy Impact ISO 179-2 kJ/m2 -